By balancing our core values of Science, Innovation, and Service, BioHorizons delivers a strong competitive advantage that supports your dental reconstructive practice.
BioHorizons is the fastest growing oral reconstructive device company in North America as a result of our commitment to providing the most comprehensive line of evidence-based, scientifically proven dental implants and tissue regeneration solutions. Founded in 1994 as an incubator company at the University of Alabama at Birmingham, BioHorizons has grown into one of the largest dental implant companies in the world, with over 1,000 employees.
From the launch of the flagship External Implant System (Maestro) in 1997, to the introduction of the Tapered Internal Implants incorporating Laser-Lok® technology in 2007, BioHorizons has continued to provide clinicians unique products supported by university-based research. Our highly advanced implant technologies, Restoration-to-Implant Lifetime Warranty, hard and soft tissue regeneration products, and cutting-edge digital dentistry and treatment planning options have placed BioHorizons at the forefront of implant dentistry.
From surgical planning and site development to final restoration, BioHorizons is uniquely positioned to streamline the implant and restorative processes, enabling clinicians to create a more efficient continuum of care. |
| |
 |
| |
 |
Laser-Lok microchannels are a series of precision-engineered 8 and 12 micron grooves on the collar of dental implants. This patented laser surface is unique within the industry as the only surface treatment shown to attach and retain both hard and soft tissue.
Laser-Lok microchannels are the result of over 15 years of research and documented studies at leading Universities. As part of the research, numerous in vitro, animal and human studies were |
conducted to (1) understand how bone and soft tissue cells react to various types of surface geometries and (2) evaluate how specific surface microgeometries affect crestal bone and the biologic width around dental implants.
In vitro Research
Cellular activity was studied on a variety of surface finishes including smooth, roughened and specifically engineered microgeometries. The engineered microgeometries were designed in a variety of repeating patterns and in a number of different sizes. Through various cell model designs, it was shown that a linear grooved pattern in the range of 8 to 12 microns was optimal for inhibiting cell growth, maximizing cellular contact guidance and providing a directed tissue response. |
| |
|
|
| Fibroblasts on a 12 micron channeled surface. |
Fibroblasts on a smooth surface |
|
| |
|
In vivo Validation
A series of animal studies (rabbit and canine) were conducted in both an implantable chamber model (intended to assess biologic response) and a dental model to assess the differences in tissue response to an engineered microgeometry versus a machined surface (control). Through these studies, it was shown that a microchannel pattern of 8 and 12 microns improved soft tissue integration, controlled cell ingrowth, increased bone and tissue attachment and reduced bone loss. |
| |
|
|
| Light photomicrograph showing connective tissue attachment to the laser-machined surface |
SEM showing bone integration of the implant body |
|
| |
Clinical Evidence
To evaluate how dental implants treated with the Laser-Lok microchannels benefit patients, a series of human histologic case studies and prospective controlled studies have been conducted. In a prospective, controlled multi-center study conducted by the Group for Implant Research in Italy, it was shown that, at 37 months post-op, the mean crestal bone loss for implants with Laser-Lok microchannels was only 0.59mm versus 1.94mm for the control implant. The Laser-Lok treated implants form a stable soft tissue seal above the crestal bone. Similarly, a prospective, randomized study has been initiated comparing an implant with Laser-Lok microchannels to the 3i Osseotite® NT implant and the Nobel-Biocare Select. This study is evaluating the peri-implant bone and soft tissue complex in patients at 6, 12, 24 and 36 months post-restoration. |
| |
|
| Histologic slides showing bone remodeling near the implant surface and no resorption areas at the tips of the threads |
|
| |
| |
 |
| |
BioHorizons Internal – Precision-machined Quality
Internal implants feature the time-proven square-thread design shown to provide higher bone-to-implant contact and reverse-torque values than competitive designs.
The intuitive layout of the Surgical Kit makes following the surgical sequence a snap. Innovative drills featuring built-in depth stops and non end-cutting geometry greatly increase surgical confidence and safety.
The implants feature parallel-walls for ease of placement, with an apical taper to help accommodate undercuts and convergent roots. |
| |
Modified-square thread for high initial stability and increased bone-to-implant contact. |
Biomechanical design and pre-mounted abutment form an outstanding combination for early and immediate load. |
Surgical drills with built-in depth stops for added safety in critical areas. |
|
| |
| Product specifications: |
| Implant Material: |
Titanium Alloy (Ti-6Al-4V) |
| Surfaces: |
Resorbable Blast Texturing (RBT) or Hydroxylapatite (HA) |
| Connection: |
1.5mm deep internal hexagon |
| Diameters: |
3.5mm | 4.0mm | 5.0mm | 6.0mm |
| Lengths: |
9mm | 10.5mm | 12mm | 15mm |
| Warranties: |
Lifetime Warranty - unconditional on implants and prosthetics |
|
| |
BioHorizons Internal – A connection you can rely on
Internal implants come with the pre-mounted esthetic 3inOne Abutment at no extra cost. This innovative component serves first as the surgical drive mount, then as an impression component, and finally as final abutment.
Besides the cost savings of not having to purchase a separate abutment, the 3inOne can be used to index the implant the day of placement. This allows the lab to prepare the abutment in advance of the next patient visit, dramatically cutting chairtime, and thereby increasing office production and patient satisfaction. |
| |
Included 3inOne™ Abutment lowers overhead and increases productivity. Esthetic margin and natural taper minimize preparation. |
Secure connection ensured by 1.5mm internal hex, lead-in bevel and Spiralock screw technology. |
Implants and Prosthetics are color-code matched for failsafe component mating. |
|
| |
| |
BioHorizons Simple Solutions - Predictable restorations in a snap.
Simple Solution protocols on BioHorizons Internal and Tapered Implants allow clinicians to provide their patients with cement-retained restorations in a minimal number of office visits. The pre-tapered abutments are designed to be restored without additional modification, and come in heights of 4.0mm and 5.5mm. The transmucosal collar portion is available in heights of 0.8mm, 1.8mm and 2.8mm to accommodate variable tissue thickness.
After the impression has been made, patients can wear a tooth-colored Healing Cap over the abutment while the laboratory fabricates the final prosthesis. Acrylic can be added to the Healing Cap as needed to help create a more natural provisional. |
| |
Figure A. Simple Solutions crown margins finish on the beveled Simple Solutions Abutment shoulder. |
Figure B. Typical crown margins finish on the abutment (shown on a BioHorizons Tapered Internal Implant with a
3inOne Abutment). |
|
| |
Crown margins finish on the beveled shoulder of Internal Simple Solutions Abutments (Fig. A). This means collar height selection (0.8mm / 1.8mm / 2.8mm) will determine the crown margin position. This differs from other cement-retained restorations where the crown margin typically finishes on an abutment margin (Fig. B). In those cases, the abutment is selected or modified in the laboratory to position the margin as desired. |
| |
Snap Impression Cap is placed on seated Simple Solutions Abutment. |
PEEK Healing Cap may be used to provisionalize the patient while final prosthesis is fabricated. |
Final prosthesis is delivered to patient. Standard PFM or CAD/CAM all-ceramic methods may be employed in the fabrication. |
|
| |
 |
| |
BioHorizons One-piece 3.0 implant is designed to provide the surgeon the option of implant placement where otherwise a two-piece implant would not be an option. The One-piece 3.0 allows the surgeon to place an implant that provides maximum strength with minimal profile.
The One-piece 3.0 is the small-diameter implant of choice for the long-term treatment of missing maxillary laterals and mandibular incisors. It allows you to treat spaces that cannot be handled with conventional two-piece implants.
Maximum Strength - Minimum Profile
Its one-piece, titanium alloy construction provides maximum strength, while its 3.0mm diameter allows placement in areas of limited tooth-to-tooth spacing. The clinically-proven modified square-thread form and a choice of either Resorbable Blast Texturing (RBT) surface or Hydroxylapatite (HA) coating have been shown to maximize bone-to-implant contact and osseointegration.
Minimal Surgery - Maximum Esthetics
Because One-piece 3.0 implants are placed using a single-stage protocol, the soft tissue benefits from less trauma than typical two-stage protocols. Immediate provisionalization allows soft tissue concerns to be addressed starting at the time of surgical placement. The gold-colored titanium nitride coating on the abutment portion also improves soft tissue esthetics.
BioHorizons One-piece 3.0 - Minimal Profile with Maximum Strength
The One-piece 3.0 is the small-diameter implant of choice for the long-term treatment of missing maxillary laterals and mandibular incisors. It allows you to treat spaces that cannot be handled with conventional two-piece implants. |
| |
One-piece titanium alloy construction for maximum strength.
|
Biomechanically-superior square-thread design maintains crestal bone levels and increases bone-to-implant contact. |
Placed using a simple and accurate 3-step drilling protocol.
|
|
|
| |
BioHorizons One-piece 3.0 - The 3.0mm answer for tight spaces
The One-piece 3.0 is the small-diameter implant of choice for the long-term treatment of missing maxillary laterals and mandibular incisors. It allows you to treat spaces that cannot be handled with conventional two-piece implants
Maximum Simplicity
Thanks to its one-piece construction, there are no additional components that must be purchased. If required, modification to the abutment portion is done using the carbide prepping bur that is provided free with each implant. |
| |
Immediate provisionalization addresses soft tissue contours starting the day of placement.
|
Gold-hued abutment portion for added tissue esthetics.
|
Use Acrylic Comfort Cap “as is” for a short-term provisional, or as a coping to create a more cosmetic provisional crown. |
|
| |
| |
 |
| |
BioHorizons Overdenture system provides the surgeon the confidence in delivering their patient a long term denture stabilization solution, while providing the patient an alternative to the more expensive two-piece implants.
BioHorizons Overdenture - Bridging the gap between “minis” & more expensive two-piece implants
The BioHorizons Overdenture implant system provides a long-term denture stabilization solution. Its cost and simplicity bring secure dentures within reach of many patients who otherwise could not afford conventional treatment plans requiring bone grafts. |
| |
Specifically indicated for long-term denture stabilization.
|
Biomechanically superior square thread design proven to have high initial stability and increase bone-to-implant contact. |
Placed using a simple and accurate 3-step drilling protocol.
|
|
| |
BioHorizons Overdenture - Maximum restorative simplicity
The BioHorizons Overdenture implants are packaged with the complete attachment set; meaning the restoring doctor has nothing else to buy. |
| |
One-piece design provides maximum strength and restorative simplicity. |
2.5mm diameter ball-top is compatible with most two-piece systems. |
Packaged with everything required for chairside attachment pick-up. |
|
|
| |
